Ⅰ . Overview Type AVE oil-air distributing mixer is an oil-air distributing mixer made of Aluminium alloy material with a quantitative structure which is equipped with one oil inlet, one air inlet and 1~8 oil-air outlets. It mainly applies to single line pressure unloading oil-air lubricating...Send InquiryChat Now
Ⅰ . Overview
Type AVE oil-air distributing mixer is an oil-air distributing mixer made of Aluminium alloy material with a quantitative structure which is equipped with one oil inlet, one air inlet and 1~8 oil-air outlets. It mainly applies to single line pressure unloading oil-air lubricating system.
Ⅱ . Technical parameters
cosity grade ≤ 760cSt/40℃; Working environment temperature is 0~40℃.
Ⅲ . Descriptions of model
Ⅳ . Working principle
The pressure oil getting in from the oil inlet makes Part 1 move downward under the act of oil pressure which clings to the top surface of Part 2 and plugs oil supply passage, and in the meanwhile opens oil inlet passage, filling oil to the upper chamber of Part 3. Part 3 overcomes the spring force of Part 4 under the act of oil pressure and moves downward. The oil in the lower chamber of Part 3 bursts Part 5 getting into the mixing chamber and discharge from the oil-air outlet through the mixed oil and air under the act of compressed air. After the main oil supply line unloads, the oil pressure on the upper parts of Part 1 is low and Part 3 returns to its position upward under the act of Part 4. The oil filled in the upper chamber of Part 3 enters the lower chamber of Part 3 for storage through the line hole on the top of Part 2 opened, thus making preparation for the next cycle of oil supply. The air supply volume of each inlet can be adjusted according to the opening size of throttle screw.
Ⅴ . Use instruction
Media should be employed in specified environment and with specified range.
Air compressing interface should be connected with air compressing network line dedicated for this oil-air system. Connection with the air source line of unknown source is strictly forbidden for the avoidance of accident.
Oil-air distributing mixer should be installed preferentially on the area with good working condition, small temperature variation and no influence by corrosive media. It is strictly not allowed to be used in the environment of long-time high temperature, radiation and baking.