banner
Home » Product > Filling Pump > Electric Filling Pump
Product Categories

Oil Transfer Pump

Ⅰ . Overview It applies to grease concentrated lubricating system, filling lubricating grease to the grease conservator of motor driven lubricating pump. This pump is not equipped with grease conservator, but directly placed on a 200L grease barrel. It can be operated separately. And if...

Send InquiryChat Now


. Overview
 It applies to grease  concentrated lubricating system, filling lubricating grease to the grease  conservator of motor driven lubricating pump. This pump is not equipped with  grease conservator, but directly placed on a 200L grease barrel. It can be  operated separately. And if connected with a corresponding electrically  controlled unit, it may realize automated grease supplementing of motor driven  lubricating system. This pump is a built-in plunger displacement pump and  worm-gear reduction rotation is employed with stable running and high pressure  output. Pressure regulation valve at the outlet is set as the role of overload  protection.


. Technical parameters

Model

Nominal    pressure (MPa)

Flow    (L/h)

Motor    power (kw)

Speed    ratio

Reducer    requires oil quantity

Weight    (kg)

DJB-V70

3.15

70

0.37

1:25

0.35L

55

Use  grease with cone penetration 265~385(25℃,150g) 1/10mm (NLGI0#~2#). 


. Descriptions of model

blob.png


. Dimensions


blob.png

 . Working instruction

The motor installed  vertically drives gear to rotate through worm. There is a eccentric shaft  installed on the top surface of worm which drives plunger to do up –and-down  round movement through crank connecting link. Grease absorbing and pressing  process is completed for the acting force of the one-way valve within the  piston and pipe cap, and grease is delivered outside through the grease  transmission rubber pipe.

. Use instruction

  1. It is suggested to connect and rotate according  to the direction of rotating arrow.

  2. The used lubricating grease should be clean  with uniform texture and within the specified model number

  3. It is required to inject lubricating oil (N220)  to the reduction gearbox to the specified grease level in the first use.

  4. After initiating the grease feeding pump for  the first time, first open the air discharge valve and close it after grease is  output normally.

  5. Idling is forbidden when there is no grease in  the barrel.

Hot Tags: oil transfer pump, China, manufacturers, cheap, for sale

Inquiry