banner
Home » Product > Filling Pump > Manual Filling Operated Pump
Product Categories

Manual Opreated Oil Transfer Pump

Ⅰ . Overview It applies to feeding lubricating grease into the grease conservator of manual lubricating pump or small sized motor driven lubricating pump with PN of 10MPa ~20MPa. Ⅱ . Technical parameters Use grease with cone penetration 310~385(25℃,150g) 1/10mm (NLGI0#~1#). Ⅲ . Descriptions of...

Send InquiryChat Now

image002.jpg . Overview
 It applies to feeding lubricating grease into  the grease conservator of manual lubricating pump or small sized motor driven  lubricating pump with PN of 10MPa ~20MPa.




. Technical parameters

Model

Flow (ml/cycle)

Nominal pressure    (MPa)

Volume of conservator    (L)

Operation required    acting force (N)

Weight (kg)

SJB-D60

60

0.63

13.5

170

13

Use  grease with cone penetration 310~385(25℃,150g) 1/10mm (NLGI0#~1#).
 

. Descriptions of model

blob.png

. Dimensions
blob.png

 . Working  principle
 When hand shank moves downward, the upper  piston door is closed and the volume of upper chamber of piston decreases  gradually, delivering lubricating grease into grease conservator along the  delivering rubber pipeline. The volume of lower chamber of piston increases  gradually, forming negative pressure and opening the one-way piece, so the  lubricating grease in the grease barrel is absorbed. When hand shank moves  upward, the upper piston door is opened, and the absorbing piece is closed, so  lubricating grease enters the upper chamber of piston. When hand shank moves  downward again, the above process is repeated.


. Use  instruction

  1. In use, an end of the grease transmission  rubber pipeline is connected to the outlet of grease feeding pump, and the  other end is connected to the feeding mouth of grease conservator. The other  end should be tightened to the screw bolt of cabinet cover after use.

  2. The used lubricating grease should be clean  with uniform texture and within the range of specified model number

  3. The grease volume in the barrel should be  checked often to avoid absorbing air that may enter grease conservator.

Hot Tags: manual opreated oil transfer pump, China, manufacturers, cheap, for sale

Inquiry